| Business Type | Manufacturer, Exporter, Supplier, Retailer |
| Length | 15-100 Mm |
| Size | 3 Inch |
| Material | Cupro Nickel Alloy |
| Application | Gas Pipe Etc,Structure Pipe |
| Fitting Type | Coupler |
| Diameter | 20-400 Mm |
| Business Type | Manufacturer, Exporter, Supplier, Retailer |
| Sizing Range Limits | 1/2 In To 24 In Nominal Pipe Size (NPS), 15 Mm To 600 Mm Nominal Diameter (DN) |
| ASME/ANSI Pressure Classes | Class 150, Class 300, Class 600, Class 900 |
| EEMUA Pressure Ratings | 10 Bar, 16 Bar, 20 Bar |
| Flange Face Geometries | Flat Face (FF), Raised Face (RF), Ring Type Joint (RTJ) |
| Surface Finish Roughness | 125 To 250 AARH |
| Joint | Butt-welding, Socket Welding, NPT/BSP Threading |
| Quality Control Testing | Ultrasonic Testing (UT), Dye Penetrant Testing (DPT), PMI, Dimensional Inspection |
| Business Type | Manufacturer, Exporter, Supplier, Retailer |
| Manufacture | Shree Vikas Metal Corporation |
| Fastener Standards | ASME B18.2.1 (Bolts), ASME B18.2.2 (Nuts) |
| Size Offering Range | M6 To M48 Metric |
| Tensile Strength (Rm) | 345 MPa To 380 MPa |
| Elongation At Break | 20% To 30% Remaining Ductility |
| Density Limit | 8.94 G/cm³ |
| Galling Resistance | Very High |
| Business Type | Manufacturer, Exporter, Supplier, Retailer |
| Size | 3/4 Inch |
| Application | Hydraulic Pipe |
| Tensile Strength | 500 / 565 MPa |
| Work Temperature | -1 To 80 Deg C |
| Sizing Range Limits | 1/2 In To 24 In Nominal Pipe Size (NPS) / 15 Mm To 600 Mm Nominal Diameter (DN) |
| Wall Thickness Schedules | Schedules 5S to 80S |
| Pressure Ratings | 10 to 20 Bar |
| Attachment Method To Pipeline | Butt-weld End |
| Business Type | Manufacturer, Exporter, Supplier, Retailer |
| Material | Cupro Nickel Alloy |
| Type | Tee |
| Size | 3 Inch |
| Shape | T Shape |
| Application | Gas Pipe,Gas Pipe Fittings |
| Diameter | 0.75 Inch |
| Surface Finish | Polished |
| Brand | Shree Vikas Metal Corporation |
| Business Type | Manufacturer, Exporter, Supplier, Retailer |
| Material Grades | UNS C70600, UNS C71500 |
| Manufacturing Method | Forged |
| Design Standards | ASME B16.11 |
| Pressure Ratings | 3000 to 6000 lbs Max Working Pressure |
| Sizing Range | 1/4 In To 4 In Nominal Bore |
| Fitting Configurations | 90°/45° Elbows,Tees,Crosses,Full/Half Couplings |
| Primary Advantage | High Pressure Threshold and Zero Weld Requirement |
| Inspection Tests | Hydrostatic Test,Dye Penetrant Testing |
| Business Type | Manufacturer, Exporter, Supplier, Retailer |
| Material | Copper Nickel |
| Shape | Round |
| Application | Gas Pipe |
| Size | 0.75 Inch |
| Fitting Type | Coupler |
| Specific Properties | Highly Resistant To Corrosion, Good Thermal Conductivity |
| Nickel Content | 10-30% |
| Copper Content | 70-90% |
| Business Type | Manufacturer, Exporter, Supplier, Retailer |
| Material Grades | 90/10 CuNi 70/30 CuNi |
| Design Standards | Forged Fittings, Socket-Welding And Threaded |
| Component Profile | Female Threaded Cap - Internal Threading Designed To Screw Over The Raw Male Threads On The End Of A Pipe. |
| Pressure Ratings | 3000 lbs to 6000 lbs High-pressure Forged Ratings |
| Sizing Range | 1/8 In To 4 In Nominal Pipe Size (NPS) |
| Primary Function | Dead-ending, Sealing |
| Key Advantage | Completely Non-welded, Mechanically Removable Seal |